Galvanised Rolling Shutters
Galvanised steel roller shutter doors can be used for a wide variety of applications. They are perfect for backyards, shop fronts and factory units. Each door is purpose made to our customers sizes and to the specication which they require .
DOOR CONSTRUCTION
Shutter curtain is interlocking galvanised mild steel laths 75mm wide, available in thicknesses of 18, 20 or 22 swg. Thickness depends on shutter size. Die-cast zinc end locks are fitted to alternate laths. The curtain winds on to a seamless mild steel roller barrel. Barrel has self-lubricating phosphor bronze oil impregnated bearings on shutters up to 5m x 5m; above this size, enclosed ball bearings are fitted. The curtain runs in vertical steel channel guides fixed to each side of the opening, with end stops fitted at the top.
- Features and Benefits
- Technical Parameter
• Provide secure protection to openings at reasonable cost.
• Space saving and simple installation; no overhead track or supports required.
• Suitable for all general industrial applications. Fire-resisting and insulated models available.
• Installation may be on the inside or outside face of the opening.
✓ The flexible roller shutter curtain can yield and springs back in case of any collision; the slats are rarely damaged or have to be eplaced.
✓ The shutter slats continue to look good after many years of use thanks to their robust and attractive profiling.
✓ Motorized rolling shutters are self sufcient and can be operated by a single push button
✓ Our Drives have weight carrying capacity up till 2000Kgs.
| Width | Min./Max. 1000/8000mm |
| Height | Min./Max. 1000/8000mm Max. Area 64.0Sqm Larger Dimension on request |
| Opening Direction | Vertical |
| Mounting Location | Inside |
| Mounting Surface | Concrete, Steel |
| Opening/Closing Speed | 0.05m-0.1m/Sec |
| Wind Resistance | Up to 120Km/Hr |
